Taiyuan Huaxincheng M&E Equipment Co., Ltd.

Slitting & CTL Line
Home > Products > Slitting & CTL Line > Thin Sheet Slitting Line

Thin Sheet Slitting Line

This thin sheet silting line, is a kind of production line to break down master coils into smaller coils of a particular width. The thin sheet silting in is made up of coil-loading car, single mandrel uncoiling, coil-end-feeding and shoveling, double roller pinching feeding, three-roller-leveling, end-cutting, strip-aligning, disk shearing, scrap reeling, hole accumulator, pre-separator, tensioning, recoiling, coil down car, hydraulic control, and electric control.

Product Details

Description:

This thin sheet silting line, is a kind of production line to break down master coils into smaller coils of a particular width. The thin sheet silting in is made up of coil-loading car, single mandrel uncoiling, coil-end-feeding and shoveling, double roller pinching feeding, three-roller-leveling, end-cutting, strip-aligning, disk shearing, scrap reeling, hole accumulator, pre-separator, tensioning, recoiling, coil down car, hydraulic control, and electric control.

Material: Galvanized strip, silicon steel sheet, coil-rolled steel strip,stainless steel strip, aluminum strip, hot roll steel strip, and so on.

Thin sheet silting is suitable for coil strip thickness 0.3~1mm, 03~2mm, 0.3~3mm and 0.4~4mm; while strip width is changeable: 600mm, 1000mm, 1250mm, 1600mm, 1800mm and so on.


Advantages:

1. High automation level to reduce non-productive times.

2. High quality of the final product.

3. High production capacity and flow rates by rigorous minimization of tooling time and high production speed.

4. High accuracy and precision by means of high precision knife shaft bearings.

5. Burr less cuts and high number of cuts with minimum deflection of the cutter shaft.

6. High winding accuracy with increasing coil diameter by means of the movable braking unit for operation mainly without separating system at the coiler.

7. Very Gentle treatment of highly sensitive surfaces such as surfaces for vehicle parts, coated strips or annealed stainless steel by means of braking processes adapted to the material surface.

8. Minimum power consumption by modern regenerative systems and using drives of special efficiency grades.


Specification

ModelMaterial width(mm)Thickness range(mm)Product width(mm)Slitting speed(m/min)
ZJ600120~6000.3~2.040~58010~80
ZJ800120~8000.3~3.540~75010~80
ZJ1300400~13000.8~4.560~125010~60
ZJ1600600~16001.0~6.060~155010~60
ZJ1800900~18003.0~8.090~175010~60
ZJ20001000~20006.0~16.090~195010~30
ZJ22001000~22008.0~20.090~215010~20
ZJ25001000~25008.0~20.090~220010~20


Remark: The slitting line can be designed and manufactured according to customers' requirement exactly.

CONTACT INFO
  • Phone: +86 150 3408 5786
  • Tel.: +86 354 2412 862     +86 354 2412 860
  • E-mail: tyhxc@vip.sina.com
  • WhatsApp: +86 150 3408 5786
  • Adress: 7# floor Xianglong Building, No.178 Yingbin West Street, Yuci, Jinzhong, Shanxi, China.
Request a Quote

Copyright © Taiyuan Huaxincheng M&E Equipment Co., Ltd. All Rights Reserved | Sitemap | Technical Support: